-
I use Debian GNU/Linux testing (Python 3) with one of those CH340G STC15F104W Development Boards.
Output:
~~~~
philipp@notebook5:~/stcgal$ ./stcgal.py -p /dev/ttyUSB2 /tmp/test.ihx
Waiting fo…
-
```
$ stcgal -V
stcgal 1.6
```
When I flash EEPROM second file to `stcgal` to empty chip, it works, no problem (`$ stcgal -p /dev/ttyUSB0 program.hex eeprom.hex`). When I try upload EEPROM secon…
-
Hi there,
I have what I believe is one of the banggood kits. I did successfully flash this firmware a while ago, I can't quite remember what settings though.
Recently I fried the µ-controller whil…
-
It would be a good idea to provide a simple UART-based output::FloatOutput that can be used directly from config. This would cover some cases when we have a dumb uC that handles PWM output.
I hav…
-
I wanted to buy this board with STC8A8K64S4A12:
I wonder if anyone tried progr…
tpimh updated
6 years ago
-
Hoping you have some pointers for me here. I'm using the DIY kit that uses the STC 15F204EA chip and I'm using Adafruit's FTDI Friend cable in its default configuration which simply emulates a USB-to…
-
Apologies if this is the wrong place for this question, I'm new to Git and this is my first attempt to flash an MCU of any kind.
I am working with the Geekcreit clock from banggood: https://www.ban…
tmh00 updated
6 years ago
-
noticing when I use protocol=auto, that it does not seem to work with stc15f204ea, but if I specify protocol stc15a, it will work.
```
jens@spire:~/build/stc_diyclock$ stcgal/stcgal.py -p /dev/tty…
-
Hello,
Can you recommend an STC MCU development board, which is easy to program using stcgal? I'd prefer a USB interface if possible.
I searched for "STC15W4" on eBay. There were some interest…
-
I see some bits in the code that mention the 404 but how do I specify it to write the eeprom? I flashed your precompiled main.hex and I'm flashing 1f:7f