-
**Observed Issue**
When using RadioLib v6.4.0 or newer with stm32duino/Arduino_Core_STM32 2.7.1 (latest) on a STM32WLE5CC-based module, radio.begin(915.0, ...) fails with state -707.
Same exact …
-
I have tried to run the following example https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/blob/master/examples/ArduinoLoRa/LoRaSender/LoRaSender.ino, but on `LoRa.endPacket();` program stuck …
-
I'm using the latest commit 00998b5 with Meshtastic firmware 2.0.22. It seems the `SX126x::findChip()` function is recognizing my module as an SX1261, although according to the [datasheet](https://doc…
-
Hi , @beegee-tokyo I am using your lib, and I get better results in the initial stage. However, in the function of using CAD, and the official document has always been the error of packet loss, do you…
-
I could need some help with LoRa communication between an T-Beam SoftRF SX1626 and a T-Beam Mashtastic. I tried to use the transmitter and receiver code from:
https://github.com/Xinyuan-LilyGO/LilyGo…
-
AU_DBM and US_DBM are set to 21, which is beyond the 15 dBm maximum when using ChipType::SX1261, including STM32WLxx configured for the Low-Power Amplifier. Calling lora_phy's set_pa_config when ChipT…
-
See _13.4.4 SetTxParams_ in the SX1261/2 and SX1268 datasheet.
Use case: The SX1262's low power PA is assumed to have less noise than the higher power PA. A 9 dBm input is needed to reach the P1dB of…
S5NC updated
8 months ago
-
Hi,
Can you please tell why the SF 5, 6 are not compatible with SX1261/2 chips? Is there a different whitening sequence that they use or am I missing something?
-
**Describe the problem you have/What new integration you would like**
Add support for LoRa WAN protocol like RFM95
**Please describe your use case for this integration and alternatives you've …
-
I flashed my ESP32-S3 (don't have a C3 on hand) with the esp-idf v5.x branch but identical happens for v4.x.
There are multiple problems, but one of them is this: as soon as an uplink is received, th…