-
I have tried to run the following example https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/blob/master/examples/ArduinoLoRa/LoRaSender/LoRaSender.ino, but on `LoRa.endPacket();` program stuck …
-
### Category
Hardware Compatibility
### Hardware
DIY
### Firmware Version
2.0.12.2400dd4-d
### Description
reboot after almost every message sent or received.
Module E22400M30S
---------…
-
thank sir for amazing work! i have been recently implementing a repeater node that receives lora packets from multiple Lora transmitters, and retransmitting when channel is free.
The issue i am encou…
-
Today i assembled all parts
Sadly i only get Error -2 when i try to initialize the SX1268 Module with
`SX1268 radio = new Module(18, 33, 23, 32)`
Theres definietly no short or a bad solder co…
-
I am seeking assistance in the library GitHub to address an issue I'm encountering.
My challenge involves establishing communication between the Ebyte LoRa E220-400M22S and the MCU ATTINY804 IC. Be…
-
Is it possible to get a throughput of 60 kbps consistently in SF5 and 500kHz configuration of LoRa? I am using an RFM95W LoRa module connected to an ESP32. I encounter a send error while trying to tra…
-
I have a Lilygo T-Beam T22 v1.1 . I've tried compiling for v1 and version v1_2 and v1, and also v1_sx1268 . It always displays No Battery Connected. Any ideas how to get this working?
Thank you,
…
-
**Describe the problem you have/What new integration you would like**
Add support for LoRa WAN protocol like RFM95
**Please describe your use case for this integration and alternatives you've …
-
See _13.4.4 SetTxParams_ in the SX1261/2 and SX1268 datasheet.
Use case: The SX1262's low power PA is assumed to have less noise than the higher power PA. A 9 dBm input is needed to reach the P1dB of…
S5NC updated
8 months ago
-
### Category
Hardware Compatibility
### Hardware
Other
### Firmware Version
2.2.23.e3c4bc54
### Description
I am trying to build a DIY device using RFM and SH1107 OLED screen. I have the firmwa…