-
Hi Guys,
Hi Kizniche,
Thanks for your very nice projects. I have already setup a T-beam LoRa tracker following your previous tutorial here:
https://github.com/kizniche/ttgo-tbeam-ttn-tracker
It …
-
When landing on the very edge of a surface, the player will randomly not jump. That is very inconvient.
It would be really cool if you could fix this.
-
**Describe the bug**
TTGO T-Beam V1 with built-in GPS does not show a GPS location even when the GPS LED starts to flash.
**To Reproduce**
Steps to reproduce the behaviour:
I used a board that …
-
Hi, i wanted to try the firmware on my Lilygo Tbeam (not exactly sure which version) with SX1262 radio and AXP192 charge controller.
I had to modify the firmware to allow being use with this board, h…
-
When attached to the serial monitor, the logs are flooded with a print buffer deprecation error, here is an example of the logs from boot (DevEUI, AppEUI, AppKey & location redacted):
```
rst:0x1 (P…
-
Hi,
I have TTGO T-Beam V1.1 which has SX1262 LoRa module.
The module fails to initialize and isn't supported with the builtin templates.
To make a long story short, here is how to solve it (not ele…
-
### Category
Other
### Hardware
T-Beam V1.1
Tested with 433 and 868 variant
### Firmware Version
v2.2.0.9f6584b
### Description
I just Web-flashed the latest 2.2.0.9f6584b Alph…
dm5tt updated
10 months ago
-
... with t-beam Rev1.
My T_BEAM_V10 is defined in the configuration.h , the RX and TX of the GPS is set right.
The blue GPS-LED blinks, even the t-beam is switched off!
I searched GPS for hours. …
-
I was wondering whether it was a good idea to append the node id to the self-generated nicknames created by the user? If I have deployed a bunch of nodes I may know the node ID and the location of tho…
samuk updated
3 years ago
-
In the Arduino IDE, which board I have to select to upload those sketches?
thx
covra updated
4 years ago