-
Hi,
I'm very new to Arduino and only found it when wanting to get some GIF pixel art on my wall. I've purchased a Teensy 4.1, SmartLED shield V5 and a 64x64 RGB LED board. I've been able to get the…
-
Hi, i plan to use teensy 4.1 on your linorobot project.
Can you give me the processus to use it?
Best regards
-
### Description
This master issue outlines the major updates and improvements planned for the UBC Rover's robotic arm in 2023. We aim to implement advanced features such as inverse kinematics with re…
-
Hi I'm interested in running I2C commander which communicates with SimpleFOC driver boards.
Code [something like this](https://github.com/simplefoc/Arduino-FOC-drivers/tree/master/src/comms/i2c#con…
-
### Describe the problem
When I start Arduino IDE, the window and title bar appear, but it remains forever on the splash screen/loading animation.
### To reproduce
1. Unzip arduino-ide_2.0.0-…
-
Hi,
Not so much an issue but I was having a look at electronic solenoids as well as pneumatic like you are using (Festo 525150?).
I did some napkin maths and I think even at 1000 rpm, the time f…
-
I succesfully uploaded the firmware into teensy 4.0, but then when I run micro-ros-agent, it won't start any node as attached picture below:![IMG_20240520_045350_912~2.png](https://github.com/linorobo…
-
A support for Teensy 4.0 and 4.1 is missing.
-
There is a problem in the [readme.md](https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V1.0) for the point:
_After opening the project, go to the platformio.ini file and c…
-
I compared [tinygo-org/tinygo/README.md](https://github.com/tinygo-org/tinygo/blob/3e109fca5f289f5e97548f061d7e0e24c9727193/README.md) with tinygo.org.
I suggest the following two things to be done…