-
Set 2 radios are set to the same analog channel so one can transmit to the other.
With Scan OFF on the transmitting radio, when you press PTT, the receiving radio un-squelches immediately and the aud…
-
I am having an issue on analog to me it sounds like the squelch is too tight even on normal. The LED lights up then it's receiving a signal and depending on how I wave the radio around or hit the moni…
-
Hi
Tytera / Retevis with GPS can not be connected to the APRS.
On the Brandmeister Refector it goes, but only there.
Is it possible to connect Hytera to DMR + with APRS?
-
Version 2017-05-20 bc3586b GPS MD390
When changing the zone with/up down button in the red button menue it will not be stored after leaving the menue.
This happens only with the gps version. I ha…
DL9SK updated
7 years ago
-
Greetings all,
After some struggle resolving all merge conflicts in the pending PR (now #741, since I deleted #743 for various reasons) is now ready to be pulled into the main repository.
Since I d…
-
Hi,
After I upgraded to the newest md380tools version with new menu under red button, my MD380 always starts with the same zone.
When I'm for example on zone number 2 and I power down the radio th…
-
D13.020 update today gives me a lot of reset in normale receiving. I never had that problem. Its after the blacklight update. On the MD380 from Tytera.
-
Dear Developpers,
After I read the initial information about writing here, I hope I make nothing wrong ;-)
I have to devices: 1 piece MD380 and 1 piece MD380G.
There's no issue with the MD3…
-
The 3x0 GPS not work on MMDVM and Motorola Repeater:
it reports to send 8 blocks of data but it only sends 2
on my MMDVM for example I have:
DMR Slot 2, received RF data header from 2222280 to …
-
Interesting find that I just saw reported on the MD_380 Yahoo group. The MD_380 windows application has the ability to read and write the radio's calibration data, The software will save the settin…