-
I'm using the SIYI MK32 GCS and building the current master using Android arm64_v8a as the target.
Currently when I connect the F9P RTK base module to the GCS, the RTK icon is showing up but seems th…
-
Reference Doc for HTTP AT commands for LARA R6001D
https://content.u-blox.com/sites/default/files/documents/LARA-R6-L6_ATCommands_UBX-21046719.pdf
Current AT commands were designed to run with the…
-
### U-Blox debug
U-blox support wants a file for support issues that writes the config file and their 'debug' data set in the .ubx files. Would it be possible to add a debug option to the sd card …
-
Use the I2C driver to create functions for the NEO-M9N GPS Module
-
I'm using a GPS tracker with u-blox and Quectel GPS modules, sending NMEA data with 4Hz = 250ms rate decoded with TinyGPS++
However, the Quectel data time stamp has always "00" centisecond, whereas t…
-
Hello:
First, thanks for an awesome project!
I was testing using the sparkfun breakout Zed F9P, and all was good and stable, but that is a prototype board....I wanted something more permanent. …
-
Arduino official boards use almost the same wifi chip with Maixduino. In order to keep WIFI API compatibility, please port the official codes into Maixduino repo.
Arduino WIFI boards:
[ARDUINO UNO…
-
Based on https://forum.rakwireless.com/t/gps-accuracy-on-rak12500/12660/13
BeeGee's code is using `setMeasurementRate()`. I've also seen this elsewhere and i'm wondering what this exactly does. Esp…
-
Ardupilot already supports RTCM messages which is a standard message format for providing GNSS corrections. SPARTN is a new standard message format for providing similar corrections. There are a coupl…
-
Hi.
Will this module receive Galileo satellites.
On the website it says that it will but some config. needs to be done to enable it.
What config. and what software to use for it?
Will that config.…