-
### What happened?
Hello,
I have installed z2m on a debian container, by using tteck script on my Proxmox server.
Once done, I have setup the passthrough of the USB adaptor.
On the shell of my…
-
Hello,
I have bumped into the following issue when trying to connect to the BNO055. I made sure it properly works beforehand by using a small Arduino snippet and it does.
I get the following me…
-
i am not able to connect to xm125, it says unable to connect recv timeout
But i amble to flash
please help
-
I've successfully flashed my ESP32 via other tools in WSL 1, but espflash does not work for me (even if I try it with usbipd set up on WSL2).
Here is what I'm seeing:
```
$ sudo usbip list -r 1…
dom96 updated
1 month ago
-
Hello,
I'm currently looking into this project, and it seems very intresting, however i'd like to have RFID LF support (especially for reading animal chips that are 134.2khz). I'm currently looking…
-
Hi,
I bought a esp32 board which has no UART connection it only works on the native USB. It gets flashed easily but when I open putty with 115200 baud rate and the correct COM port it is stuck at the…
-
https://workshop.fomu.im/en/latest/hdl.html says, "Ideally, a USB-to-UART core would be provided for users to instantiate in their HDL designs."
Is this still a desirable goal? I don't have much H…
-
I'd like to have a log.zig logFn that I could use to emit debug logs over USB, rather than UART.
Currently Microzig has support for acting as a USB HID device. I believe emitting debug logs over US…
-
Hi,
I have nearly each day an discconnect of my CP2102 USB to UART Bridge Controller
In **journalctl** appears:
```
Dez 27 21:38:35 vcontrold kernel: cp210x ttyUSB0: usb_serial_generic_read_bu…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…