-
Display does not appear if you git upgrade before driver install.
### Raspberry Pi OS
bookworm 64bit 2023-10-10
```
pi@raspberrypi:~ $ cat /boot/firmware/issue.txt
Raspberry Pi reference 2…
-
Hi!
I use peppy, Waveshare 3.5" LCD (B) display and shutdown device. When there was no display there were no problems. The radio worked for days. After connecting the display, problems began.
1. The…
-
on fw 2.73 showing Short Long Long Green led, loading OFW, switch Lite . RPI Zero x2 chips.
is this FW issue or RPI zero, no information about this error code, any info.
-
### ⚡ Feature Request
For vision L3X-Z uses a pan/tilt head consisting of two Dynamixel MX-28AR with 2 x OpenMV [OpenMV Cam H7 R2](https://openmv.io/collections/cams/products/openmv-cam-h7-r2) …
-
After a few days of usage, the Inky examples don't work anymore. First I thought, the screen had some defect, but then, just in the case decided to check out how Waveshare reacts to Inky displays. It …
-
| Answer some general questions first | |
|:------------------------------------------------------------------- |:------: |
| Which firmware version are you using? …
-
I tried to adapt i80_controller demo to use esp_lcd_ra8875 component. It seems to work but there are artifacts and shifted image. It is most visible on LVGL FPS counter as it is redrawn periodically. …
-
Hi, with the last two versions of the player I have a problem with communication. Immediately freezes the image on the screen, but the player normally plays, can control, work saver ...
Maybe more wi…
-
Hi all,
I recently saw this tutorial for a YouTube subscriber count using a Waveshare eink display:
https://www.the-diy-life.com/make-a-youtube-subscriber-counter-using-an-e-ink-display-and-a-ra…
-
Everytime I reboot my Recalbox 8.0 the icon for McAirpos gets removed for some reason, requiring me to go into the terminal and run the install script again. This is very bad for a portable game conso…