-
***EDITED***
Hi,
I have taken the controller card to my lab
Firmware: GS523DZR1B
Date(?): 20111006
(Labeled on the microcontroller)
The display (currently NOT connected) is: VL801D E8 SER DLX…
-
**Describe the problem you have/What new integration you would like**
I have some Wemos motor shield and I would like use for driving a fan. It's an I2C controler.
I've tried to using custom…
-
Hi, this project is excellent, but I've run into some issues when using the system with an ESP8266 (a Wemos D1 Mini specifically). Basically the output "glitches" constantly depending on the effect I'…
-
Hi!
I bought this:
https://www.aliexpress.com/item/Lolin-ESP32-wemos-ESP32-WiFi-Modules-Bluetooth-Dual-ESP-32-ESP-32S-ESP8266/32807483723.html
Is this github repo right one to be used with produc…
-
Seems the genuine D1 mini pro is in short supply, so I had to buy a clone!
The problem is the clone uses CH340 for the USB to Serial whereas the original uses the CP2104. It also has no series resist…
mopac updated
4 months ago
-
Hello, I currently have a esp8266 12-E hosting the broker/server using UMQTTbroker and when I look at the mqtt topic data0 on my pc using mqtt lenses the feed is very fast and there is no lag but when…
-
I'm trying to get your shopping list printer to work with the D1 mini (https://www.wemos.cc/product/d1-mini.html).
In your schematic you refer to the GPIO0 and GPIO2 pins. I would like to replace t…
3kmch updated
7 years ago
-
Hi!
I downloaded this sketch to my Wemos D1 mini pro V3.0.
It keeps freezing up about 1 second after boot up and gives me this error message in Arduino IDE 1.83:
"rst cause:2, boot mode:(3,6)"
…
-
Καλημέρα,
Για αρχή θέλω να σου πω ένα μεγάλο ευχαριστώ για όλο αυτό που έχεις φτιάξει!!
Το πρόβλημα που αντιμετωπίζω είναι το εξής.
Ενώ το wemos κάνει connect κανονικά στον mqtt βλέπω και το…
-
Hello all.
I get quite a few invalid conversion errors when compiling.
Arduino 1.8.19 IDE
Wemos D1 mini R2 (Default settings)
ESP8266 Community version 3.1.2 installed in the boards menu.
…