-
i can't seem to get my teensylc to even power the mclaren wheel. the screen won't even come on and usb doesn't recognize it at all.
is there a new different pinout for the wheel? can anyone sha…
-
- conduct torsional stiffness simulation
- (ideally) determine torsional stiffness distribution along wheelbase
- examine engine forces acting on a chassis
- save screenshots of post processing and r…
-
Hello I wanted to see if you'd be interested in adding a couple alternate schematic images? I edited yours to show an Arduino Uno in place of the nano and also both using a single voltage divider on …
-
I guess this should work with DD1 base, has anyone tried it?
In my case, when I connect the arduino to the base, the displays turns off, and I have to power off and on the base to start working aga…
-
Due to front and back wheels having a different track width, we may have to acquire a new value with trial and error.
So far we've tried:
1. `(13.7+15)/2 = 14.35 in` as an attempt to average the f…
-
is there anyway could connect a diy pedal to wheel base directly?
-
Pushes away building blocks and resources (possibly split them into seperate ones.
-
does it matter to use two rear wheels or two front wheels for driving?
I don't see anywhere to configure it. The location should be different under these two situations, correct?
-
@lshachar
Hi Ishachar, I used the connection schema (the good one, not mine)
I soldered all wires correctly to the Level Shifter and to the pins. I uploaded the sketch arduino_fanatec_wheel.ino p…
-
I want to work on an adapter to connect custom pedals.
According to online sources, it should be straight forward voltage divider circuit with each pedal on it's own RJ12 Pin.
I have tried such a co…