-
### Context
At comp something shorted on the rear power distribution board. It now no longer requires the reset button to be hit to be active, and upon GLV turning on it momentarily turns on multip…
-
Hello,
randomly I get the following error message. I use knutwurst custom firmware 1.5.3
I use a Anycubic MEGA X printer.
What could be the reason?
**Heating failed, system stopped! Heater_ID:…
anno0 updated
5 months ago
-
Payloads 1 - 4 on mainboard v01 and v02 are designed with a SPI/I2C/UART interface that accommodates my [ADC breakout boards found here](https://github.com/maholli/XTB) which have been used for a mult…
-
I continue to get the following and can't seem to track down why.
X: 20.38 Y: -7.51
The angles are wrong!!!
It doesnt matter what orientation i have the MPU in.
-
Hi, i have managed to dissasemble the x2 and reverse engineered the bms, the charger cartridge, and the smart cartridge pinout, I would love to help you and write this manual with you! I believe you …
-
**What has to be done**
Have to select and document shrink tubing and some sort of wire harness solutions for:
* blower power and signal cables
* oxygen sensor
* pinch valves
* solenoid
-
### Context
We require enclosures for our PCBs
### Outcomes
The enclosures should be able to do the following
- Provide mounting
- Provide vibration dampening
- Seal to IP code X4
-…
-
### Version
1.41
### Operating system type + version
Mac OS 10.13
### Behavior
When printing individual objects, the objects should be printed from front to back, otherwise tall objects print…
-
I believe I got one of the last 1.0 kits, since my belts were too short and I didn't get the tools. So some of these items may have already been addressed.
That said: a few suggestion, if able:
…
-
Requesting full binaries such that anyone can jump between versions, or at a minimum, MSS54 2601 2801, MSS54HP 2501 2701 and MSS54HP CSL 0401.
See the wiki here: [Flashing Different Major Versions …