-
Trying to use the great Neopixel library on a Libre board but it seems like it is not supported. Any thoughts on providing this ?
It appears for the bcm283x boards you utilize the _rpi_ws281x libra…
-
I'm running an Adafruit Neopixel strip of 120 lights (Should be ws2812), hooked up to a raspberry pi via a 74AHCT125 3.3v to 5v converter. Values on the darker ranges only seem to update every 16 step…
-
### The problem
The rp2040_pio_led_strip can no longer control a sk6812 strip after 2024.6.0b1 it works fine with 2024.5.5. I scoped the pin output and I am getting data but my scope is really antiqu…
-
Hi, I'm hitting an error with your installation script:
> Installing Unicorn HAT/pHAT library for Python 2...
>
> Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
> …
-
## Bug report, debug log and your config file (FULL LOGS ARE MANDATORY)
#### Steps to reproduce
Select /dev/video0
Using HDMI to CSI which works perfect on the OS.
#### What is…
-
Hi, I have an LED that is not part of my grid and I have offset it in my alternating-matrix.
`ws281x.setIndexMapping(alt_matrix(75,8));`
I have text scrolling great but my issue is my 601st led is j…
-
I am having issues trying to setup the Neopixel 12 Led Ring with raspberry pi os 64 bit.
The setup works fine with raspberry pi 32 bit os
I am using the following commands
sudo pip3 uninstall …
-
Hello!
I was just taking perusing the Rust LED ecosystem recently and noticed your project mentioned it was inspired by my [rpi-ws281x/rpi-ws281x-rust](https://github.com/rpi-ws281x/rpi-ws281x-rust…
-
I'm trying to install rpi_ws281x on Windows 10 Pycharm IDE as I have a lot of coding to do and it will be easier to do all the coding there instead of the IDE on the Pi. When I enter the command `pip…
-
I've never used a Raspberry Pi or anything other than Windows 10 at its basic level. This is my first attempt. I've managed to get my Pi up and running, connected to the internet, running headless mod…