-
Originally posted by @JohnConnett in https://github.com/kardia-as/zigpy-zboss/discussions/43 under discussions section https://github.com/kardia-as/zigpy-zboss/discussions
> _**I have an nRF5340 DK…
Hedda updated
1 month ago
-
Hello,
I am trying to get the XBee3 working with Arduino and another one connected to XCTU, however, the code that I used for XBee2 didn't work for the Series 3.
Does anyone how to correct it?
…
SWoto updated
4 months ago
-
@Equidamoid Please tag an initial release version of pyconz and also make PyPi release of pyconz.
An initial PyPi release version and then continues versions/releases will make it easier for Linux …
Hedda updated
5 years ago
-
#170 added a watchdog command (`VR`) that is sent every 30s to ensure the radio is still alive. It seems that the XBee serial protocol can't handle this and the command times out, causing a restart. I…
-
The Ardtweeno system will be far more useful if it is capable of communicating with XBEE radios running in API mode.
-
Please consider writing a ZiGate radio library that works with the zigpy library for Home Assistant:
https://github.com/zigpy/zigpy
zigpy is a is Zigbee protocol stack integration project that i…
Hedda updated
5 years ago
-
As per https://github.com/PX4/px4_user_guide/pull/106#issuecomment-349150302 there are some additional modems listed in : https://pixhawk.org/peripherals/radio-modems/start - e.g. Xbee.
The action …
-
Hi,
I have been unsuccessfully trying to figure out how to use the ROS node to enable the RTK compassing for the EVB2.1, using two antennas connected to the F9Ps.
I am using the `example_params.…
jkaob updated
3 months ago
-
# Discussion and notes about the future logger
## Design of the future board
### Components to include, and Architecture
![image](https://raw.githubusercontent.com/spectraphilic/wsn_hardware/ma…
-
For xbee2/data the Transmit Options is masked with 0x08.
While the documentation says;
Transmit options
0x01 = Disable ACK
0x02 = Disable network address discovery
Set all other bits to …