-
./a.out -t /dev/ttyUSB1 -b u-boot-a38x-spi-uart.bin
Sending boot message. Please reboot the target...-
Sending boot image...
0 % [.................................................................…
-
-
Of course, xmodem support will be dropped.
Q: Why not migrate to Optiboot?
A: I need an entry to spm from application code which is not supported by Optiboot
Q: Why not other bootloaders?
A: Because…
-
The SAM-BA protocol supports block transfers to reduce the protocol overhead which is important for serial connected devices running at 115200 baud. This should be implemented and used in the flash co…
-
Sun 10 May 2015 07:59:16 PM CEST
From [http://www.nongnu.org/avr-libc/user-manual/group__util__crc.html](https://savannah.nongnu.orghttp://www.nongnu.org/avr-libc/user-manual/group__util__crc.html):
…
-
Hi avoidik,
I am trying to upgrade u-boot on my DNS320.
I would like to test it through uart before writing it to the nand.
However, kwboot does not work and always end with an error "Xmodem: bad mes…
-
Checking the boot the UART Serial console, the system does not boot. Is there a way to perform a reimage xmodem? I can access U-boot terminal
9601D# ?
? - alias for 'help'
base …
-
Hello serrj-sv,
I'm trying to downgrade firmware in my gateway [lumi.gateway.mgl03].
I have problem with transfering/sending data/command.
I don't know why when i use `cat /dev/ttyAMA0 `to see logs…
-
Hello,
Can I use the plugin to transfer files over RS232?
So far I just got to fetching a file object from a file input, making conversions to hexstring and passing it as a parameter to the writeHex…
-
First of all, thanks for the crate, it's working really well for me right now.
In my experience using it, however, I did run into some issues trying to understand how it works. I was trying to veri…