-
Hello, we have a problem with this layer. We use poky zeus and after we configure _bblayers.conf_ and _local.conf_ as described below, when booting the target system (zybo-zynq7) on serial we see this…
-
Hi,
So I have have followed the README tutorial and was able to successfully build Yocto image with respective Intel BSP.
Initially I built Intel-corei7-64 BSP, flashed it onto a USB stick and boo…
-
**Describe the bug**
I'm getting an error while building azure meta-iotedge for a kirkstone image.
ERROR: aziotctl-1.4.7.AUTOINC+91e058880c-r0 do_install: ExecutionError('/mnt/storage/yocto/ki…
-
Hi, I was wondering if we could get [line 28 of tn-base.inc](https://github.com/TechNexion/meta-tn-imx-bsp/blob/1ae9d78e6dabeabf9cb914274a79347a608c141b/conf/machine/tn-base.inc#L28) removed, or at le…
-
hi,
I try to add optee for pico-pi-imx7 board in current yocto version.
I add below lines in local.conf
..
DISTRO_FEATURES_append=" optee"
IMAGE_INSTALL_append = " optee-client-imx optee-os-…
-
in " meta-beagleboard / common-bsp / conf / machine / beaglebone.conf " there is a missing line: KERNEL_DEVICETREE = "${S}/arch/arm/boot/dts/am355x-boneblack.dts". This is needed for dtb generation ( …
-
This is actually mysterious: it does ```setenv mcore_clk clk-imx8m{m,n,p}.mcore_booted``` which is handed over to Kernel command line.
BUT: it sets it just once and not persistently (…
-
When running another "bitbake" while the nfs-export-updater has not finished it's current operation yet, we seem to be running in some kind of deadlock situation:
bitbake stuck without any progress…
-
This issues is to document my attempt to a build of linux kernel 3.19 to build as a yocto linux BSP layer on top of the Intel Edison BSP layer.
The intel/maker/edison forum post for this is at https:…
-
Hi, I'm using the Yocto-BSP for the enclustra-mpfs SoM wich mounts a PolarFire SoC device.
Hi have a node in my device-tree which is used to reserve a set of cached memory:
```
/{
reserved-m…
Ryose updated
3 months ago