-
In the EU version as a test I've centered Radio_1 on 869.5MHz in the gateway. This produces frequencies of 869.1/3/5/7/9. All of these frequencies lie within an allowed ETSI band.
When I receive th…
-
Last night I was investigating a high packet error rate in the traffic received by lora_receive_realtime.
I had been observing a PER of 30% with code prior to v0.6.2, and had been seeing a very predi…
g0hww updated
6 years ago
-
@martinbudden @mikeller @gke
TL;DR: The gyro overflow slew filter hasn't been actually doing anything for the majority of the users with the affected ICM206xx gyros.
The story:
I got out my …
-
Is it possible to add experimental ISM band for Russian Federation?
All parameters are the same as in band_eu863_870.go except frequencies.
Ch# Freq Modulation duty cycle …
-
Good day,
Is it possible to change channel settings as following?
"chan_multiSF_0": {
/* Lora MAC channel, 125kHz, all SF, 868.1 MHz */
"enable": true,
"radio": 1,
"if": -4…
-
Hi Iceman !
So I have this doorlock which works with an RFID tag https://www.thequicklock.com/product-doorlock.php
It seems your fork can't detect it with the `hf search` command, this is the re…
ID-ao updated
6 years ago
-
Hi,
I've been having trouble implementing an Adafruit 32u4 Lora node that honors the TTN frequency plan at 915MHz... this fork made some improvements over the Things-NYC in that the channels seem t…
-
Hi, I bought a cheap rfid copier.
http://www.ebay.com/itm/Handheld-Portable-125Khz-RFID-Duplicator-Copier-Writer-for-EM4100-T5577-Card-/191630611446?hash=item2c9e1313f6:g:D7UAAOSwyQtVo4pM
Inside it …
-
i want to sniffing the data transmit about the 125khz id card, but not know how to do it ?
-
Ok I'm back, i know I'm annoying...
Running MRAA on an RPi A+ in NodeJs
MRAA Module Version: 'v0.7.3-20-gef28607'
Node Version: v0.12.6
NPM Version: 2.11.2
I manualy compiled mraa on the board as per…