-
When I restart the concentrator after the first time. This error is shown. I use the RAK2247 USB dongle gateway. How can I send a restart command to the USB dongle. After pulling the dongle out its wo…
-
How the keyboard attaches to the system (over some spi/i2c (via the EC), or through USB) is a very useful property to know when considering to buy a laptop for Qubes.
This is especially true if we …
-
### CircuitPython version
```python
Adafruit CircuitPython version 9.4.0
```
### Code/REPL
```python
===========================================================================
# SPDX-FileCopyrig…
-
Hi Mr. Greiman, thank you for your efforts, I appreciate you. I am working on a wrist watch project that will use an ESP32 (for the Bluetooth and Wifi capabilities and 2 processors), a TFT display, an…
-
how to make the touch work?
the touch driver are loaded but nothing happens .
im using a raspberry pi zero w
-
```
What steps will reproduce the problem?
1. Plug in an FTDI device with multiple interfaces (e.g. FT2232H w/IFACE_A,
IFACE_B)
2. Connect to the first one (successfully), using e.g. SPI:
mpsseA = Op…
-
```
What steps will reproduce the problem?
1. Plug in an FTDI device with multiple interfaces (e.g. FT2232H w/IFACE_A,
IFACE_B)
2. Connect to the first one (successfully), using e.g. SPI:
mpsseA = Op…
-
Yesterday, a user reported on discord an issue in which their library's CI was failing.
Upon a quick investigation, i found out that it had to do with slight differences between the CircuitPython c…
-
After flashing `TTGO ESP32 LORA - 868MHz, for USB-OTG with handset` firmware on a TTGO ESP32 LORA (using command provided in the readme) I have no feedback (oled black), serial port reply just with bo…
-
I've tried to upgrade from 2.3 to the latest version (currently 3.0d) and was having issues with programming it with the USB adapter provided on KNJN. I've read about using a JTAG to programming the S…