-
When starting a TX stream, it seems with the sync interface any buffer submitted before the call to lusb_stream() is discarded and lost. Here is verbose output illustrating the problem:
```
Using Vo…
-
If the underlying stream fails (e.g., the bladeRF is unplugged while streaming), the sync_rx/tx calls do not return with an error if called with timeout_ms=0.
A workaround is to set the timeout_ms p…
jynik updated
10 years ago
-
This is a vestige from when many of the contained functions didn't return any status. [This function](https://github.com/Nuand/bladeRF/blob/daaa2e92c8c52fb58ff8a19738cc764f6d0f44cc/host/libraries/libb…
jynik updated
10 years ago
-
This is an improvement request to add a DC remover block in the FPGA (just like it is done in Ettus USRP2) to avoid wasting CPU computation on that and thus resulting in a much cleaner signal.
-
This function provides an *actual parameter which reports the value that's actually written to the SI5338 after all the necessary calculations have been performed.
A more user-friendly interface may …
jynik updated
10 years ago
-
The resulting pkg-config file only includes -L, but is missing -lbladeRF
jynik updated
10 years ago
-
for consistency
https://github.com/Nuand/bladeRF/blob/master/host/libraries/libbladeRF/include/libbladeRF.h#L1605
-
We can keep around a -DBUILD_DOCUMENTATION option, but we should be able to enable/disable documentation on a per-component basis.
For example, someone should be able to build libbladeRF documentatio…
jynik updated
10 years ago
-
https://github.com/Nuand/bladeRF/blob/master/host/libraries/libbladeRF/src/backend/libusb.c#L2197 should be dev->transfer_timeout[module]
-
The asynchronous interface offers performance, but not ease of use. It is confusing for the average programmer to use correctly.
Add a synchronous looking read()/write() interface for convenience wh…