-
Hi there!
Am I right that this repository is not up-to-date and working with its resources?
I found that install.sh is referring to a binary called poly_pkt_fwd, but it seems that the code
at htt…
-
Hi : -)
after a push packet, if the packet is not ACKed from the server, is the packet re-send?
All I see is here: https://github.com/Lora-net/packet_forwarder/blob/master/lora_pkt_fwd/src/lora_…
-
https://github.com/brocaar/lora-gateway-bridge/blob/5352d6f162767996253c21a940273d3f2593744c/gateway/backend.go#L446
Will it be posible to add system time to packets that does not have time var?
F-M-A updated
6 years ago
-
I've got the multitech-installer and TTN packet forwarder running on a Conduit AP. The gateway is based on mLinux. This what I did.
~~~
opkg update
opkg install libmpsse nodejs
~~~
And this p…
-
I'm trying to run Semtech Packet Forwarder using the AU-global_conf.json file provided (without any changes).
When I start the Packet Forwarder service, all of the multi-SF channels seems to be conf…
-
Hi
After upgrading to the latest code, I started seeing a lot of "ack_lost" warning messages. Then I realized that my gateway was not receiving any PUSH ACK from the server. It was a timeout proble…
-
Ranging from 863 to 870
See https://github.com/Lora-net/packet_forwarder/blob/master/lora_pkt_fwd/global_conf.json#L23-L25
-
Hi,
in your KR-global_conf.json file, there is IF value 600000 and -600000.
it seems IF value is limited by semtech lora gateway HAL.
how can i fix this value while following KR's channel plan?…
-
Hi Broccar,
we are in the testing phase of Lora server with Microchip Lora Gatwey version 1.0.4.
We had this error:
feb 16 23:02:29 ******** lora-gateway-bridge[12324]: time="2017-02-16T23:02:…
-
Hi kersing
I've build from scratch on my PI3 with IMST IC880a board on raspbian etcher.
When I launch old packet forwarder all is working fine.
```shell
root@ttn-gw02(ro):/opt/ttn-gateway/bin#…