-
### Description of the setup:
* Device: Red pitaya 125-14
* SD card image:
* Application:
* Other relevant information:
### Description of the problem:
When using AXI BRAM reader and…
-
### Description of the setup:
* Device: STEMLab 125-14
* SD card image: red-pitaya-alpine-3.8-armhf-20181218
* Application: sdr-transceiver
* Other relevant information: using GRC
###…
-
### Description of the setup:
* Device: STEMLab 125-14
* SD card image: red-pitaya-alpine-3.8-armhf-20181218
* Application: High-speed direct sampling voltage measurements (want to interfa…
-
Hi Pavel:
looking to use Labview as sdr-transceiver client, do you have any example vi I can use to start with ?
Thanks
-
Hi Pavel,
I have a question about your `axis_red_pitaya_dac` IP. When I simulate this IP in Vivado, I can see that the update rate of `dac_dat` is equal to the `aclk` input:
![grafik](https://us…
-
### Description of the setup
Windows 10 ....no linux pc
* Device: redpitaya 125-14
* SD card image: red-pitaya-alpine-3.9-armv7-20190215.zip
* Application:
* Other relevant informatio…
-
### Description of the setup:
* Device: RedPitaya w/ 14-Bit ADC
* SD card image: Downloaded from https://pavel-demin.github.io/red-pitaya-notes/sdr-transceiver-wspr/
* Other relevant infor…
-
Hi Pavel,
not an issue at all - but something which might be interesting. Adalm Pluto is a SDR TRX which works from 70MHz...6GHz in full duplex. It uses AD9363 transceiver chip and same Zync FPGA-S…
df8oe updated
5 years ago
-
Hello Pavel,
Probably too early to say (??) , but will your different software remain compatible with the new RP announced on 22 November 2018 ?
see: https://www.redpitaya.com/n86/new-stemlab-sdr…
-
CW Skimmer Server is written with the QS1R in mind, where you have a usable bandwidth of about 95% of the sample bandwidth (thus the 45.5, 91 and 182kHz bandwidths).
Measurements show that using y…