-
Pulse signal is smooth and looks good but the BPM is giving 150+ sometimes it also show values when there is no finger.. My wiring is correct and i'm supplying 5v DC to arduino. I'm using Arduino pro …
-
BPM and SPO2 Values are not valid for my sensor MAX30102 and ESP32.
Used more types of algoritm and result is not valid BPM and SPO2 values.
How can i correct?
[
![mess1](https://user-images.git…
-
I've been struggling getting decent range out of my Ai-thinker Ra-01 SX1278 module and found that by adding a function to read register RegRssiValue (0x1b) was extremely helpful to check the health an…
-
Hi,
I have pulses without a sound. So even with silence. I suspect that the microphone has a bug. What do you think?
Here you can take a look: https://www.dropbox.com/s/tudjnyesxygd2lo/telegram-…
-
If you are reporting a bug, we would like to know:
* What you were trying to do,
I write a test.py with one line: x = 1
I press Run button and see "ESP MicroPython REPL" errors about soft reboot.…
-
I'm used to `Cmd-/` to toggle commenting selected lines, but Mu hard-codes the keyboard shortcut for that instead of letting me set it: https://github.com/mu-editor/mu/blob/4344548bc25df03ffb89b9535ae…
-
**Serial Port of arduino always shows me 0**. Initialization is successful as I get it right but I get only zeros in the serial port. I've tried all the three example codes and no one shows me the val…
-
Thank All for the effords,
This the only Library that worked for me.
May I ask if it is possible to make SerialPlotter example code .
It would help me with my ecg project.
Thanks U.
-
This is not an issue reporting. I just wanted to suggest a small modification that allows using other I2C buses.
.h modifications:-
Adafruit_MLX90614(TwoWire *I2C= &Wire, uint8_t addr = MLX90614_…
-
Follow the instructions below to chart a pressure setpoint graph from the Arduino. This shows the system pressure the Arduino *wants* to achieve.
This chart should be a square wave with a consiste…