aromring MAX30102_by_RF issues

aromring / MAX30102_by_RF

Arduino C code for MAX30102 pulse oximetry sensor (MAXIM Integrated, Inc.)

166 stars 73 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Can't Print SPO2 on OLED

#41 AustinTetteh closed 1 month ago
5
Can't get past maxim_max30102_init(); on ESP32-C3

#40 moeburn closed 1 month ago
1
Small change to facilitate compilation in a Linux box

#39 fexadom closed 5 months ago
1
Revert "perf: Only use Red & IR arrays from function param"

#38 aromring closed 1 year ago
1
perf: Only use Red & IR arrays from function param

#37 0xMihir closed 1 year ago
0
Float buffer allocation uses unnecessary memory

#36 0xMihir closed 1 year ago
5
Error while compiling

#35 sivaareddi closed 2 years ago
3
Calibration issue -> Potential issue with maxim_max30102_read_fifo

#34 elidonner closed 2 years ago
3
30102 not working

#33 Akshayrajkr closed 2 years ago
1
Need to change 50 Sampling Frequency / 1 Sampling Time

#32 madhavanatmel closed 2 years ago
6
Max30102 is not powering up

#31 rishabh900 closed 2 years ago
0
Unable to understand the meaning/derivation of the way of calculating the slope of baseline

#30 rishabh900 closed 2 years ago
1
BUG and Improvement suggestions

#29 williamesp2015 closed 2 years ago
4
RED/IR sensor value looks strange

#28 integer-bin closed 2 years ago
4
if (!sensor.begin())

#27 gallaugher closed 3 years ago
1
HR always -999 or invalid while wearing sensor on wrist.

#26 AAJAY5 closed 3 years ago
11
I cant found more detail sensor settings, problems with get values

#25 sjsivo closed 3 years ago
6
min_autocorrelation_ratio = 0.5???

#24 GOKUandVEGET closed 3 years ago
1
Accurate HR and inaccurate spo2 with inaccurate low spo2 test sample

#23 MirzaSamnani closed 3 years ago
4
MAX30102 FIFO returns IR data first (i.e. LED1 = IR & LED2 = Red)

#22 theophyk closed 3 years ago
2
new code bug

#21 GOKUandVEGET closed 3 years ago
3
using esp8266-12e

#20 alinelena closed 3 years ago
3
File names and case sensitivity

#19 mgaman closed 4 years ago
1
New code bug

#18 GOKUandVEGET closed 4 years ago
3
Heart Rate Stuck at 93

#17 caferrick closed 4 years ago
1
The question about Relative autocorrelation

#16 GOKUandVEGET closed 4 years ago
1
Bug fix: incorrect heartbeat rates in some cases

#15 aromring closed 4 years ago
1
some abnormal data

#14 GOKUandVEGET closed 4 years ago
8
Can't get SpO2 to work

#13 robcazzaro closed 4 years ago
29
Share reference raw data from MAX30102 module

#12 aziubin closed 4 years ago
1
How to solve the error of high heart rate. And the actual error is 2 times or 3 times, thank you

#11 GOKUandVEGET closed 4 years ago
21
nrf52832&Max30102

#10 Lashca-Rombot closed 4 years ago
15
Wrong Readings

#9 jointothedarkside closed 4 years ago
2
Heart-rate is always the same (83 Bpm)

#8 asemchenko closed 4 years ago
25
Cool. Can I link two MAX30102 sensor by this code?

#7 timeanddoctor closed 4 years ago
2
High heart rates reported incorrectly

#6 Mr-99 closed 4 years ago
11
Are we confident enough in the data coming from the board?

#5 kwende closed 5 years ago
3
IR and Red signals do not show any heart rate info

#4 doug-burrell closed 5 years ago
6
Unable to print SPO2 and HR via serial connection

#3 jaredwong92 closed 6 years ago
8
Not work with higher sampling frequency

#2 dzungpv closed 6 years ago
14
Sensor not turning on

#1 RimonB95 closed 6 years ago
4