-
when i use arduino IDE 1.8.5 compile LoRaWAN example by B-L072Z-LRWAN1, it shows "
# exec: "/bin/arm-none-eabi-g++": file does not exist"
i'm not sure what's the problems.
-
Dear GrumpyOldPizza,
I tried to upload a Sketch to my B-L072Z-LRWAN1 board, (chose right board and COM port in Arduino).
However, I get the following error message:
```
An error occurred while…
-
I have been unable to get IDE 1.8.5 to see the USB port to allow programing of this device on a Mac... OSX ver 10.13.2
Apple's USB prober see's the device, but its never available in the IDE...
…
-
When zephyr.git/tests/kernel/arm_irq_vector_table is run on nrf52_pca10040, usage fault occurs.
Sample log:
```
***** USAGE FAULT *****
Executing thread ID (thread): 0x20000d9c
Faulting …
-
First of all, thank you for your time!
While following the step-by-step guide on a win7 machine, I encountered the following problem:
When showing all devices in Zadig, I cant see a STM32 BOOTLOADER…
-
### Description
- Type: Bug
- Priority: Major
---------------------------------------------------------------
## Bug
**Target**
NUCLEO_L073RZ
**Toolchain:**
GCC_ARM
**mbed-os sha:**
…
-
Hi,
I’m really new in the use of the Lora end-devices and I have some troubles to achieve a low consumption in sleep mode (I get 0,13mA).
My lora end device has a CMWX1ZZABZ-078 micro-controller…
-
Not sure if this is intentional behavior or not, but, after I perform setSaveSession(true) and joint the network the first time, subsequent joinOTAA's have no effect, ie. no MAC commands are sent to a…
-
# AliOs-Things资源要求：
- Ram最少要求多少kBytes
- Rom最小要求多少kBytes
- 运行频率建议
最后， stm32l0系列可以支持吗？
-
The changes proposed in #6575 and #6576 need many efforts to be undertaken. This issue will track the progress and should help to synchronize the work efforts.
Modules in RIOT that need adaption:
…