-
Hej,
thanks for this great binding.
There are more values which can directly be gathered from the Deye-SUN-2000G3-EU (deye_4mppt).
I found an [deye_4mppt yaml definition](https://github.com/jed…
-
Hi,
after updating the firmware to 2.27 which is mandatory to use with the SUN-MI-RELAY-01 the logger status says offline. Even when I'm using modbux proxy for both connection to the inverter.
*…
-
When I buy energy during the night, both daily battery charge and discharge are ticking up also.
![image](https://github.com/StephanJoubert/home_assistant_solarman/assets/17816446/08e7dbd5-1bd5-408…
-
Jeg har 2 invertere (Addr. 01 og 02).
Når jeg benytter Mod(e)BUS stikket på masteren, kommer der intet svar. benytter jeg derimod stikket på slave-inverteren, får jeg fint svar - men de data jeg får,…
-
I'm not sure if this is a bug or if I've managed to configure something incorrectly. I'm using the Docker version of Emhass and my day ahead optimization results sometimes work but mostly I end up wit…
-
### Describe the bug
I added a vehicle, Nissan Leaf ZE1 2018, via evcc cli and checked it in the yaml file - looks good.
When I run `./evcc --log trace` I can see the call to the vehicle API and …
-
**Hardware:**
- Inverter model: `Deye SUN-12K-SG04LP3`
**Software:**
- Logger firmware version: LAN-Logger `where to find?`
- deye-inverter-mqtt version: `2023.05.4`
- config.env:
```
L…
-
Thank for the AWESOME custom component... been looking for a while and that exactly what I need.
Do you use the Energy configuration in Home Assistant? What is the entity for Grid consumption, Retu…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Current Behavior
I have installed all the update for a couple of months and though the language translation is…
-
Hi,
Do you have plans for supporting the new range of BMS's from JK e.g. JK-PB1A16S10P?