-
-
hello, I've been trying to run nexmon csi on raspberry pi 4 b, I tried to use kernals 5.10, 5.4, and 4.19, and everytime i get the same errors, when using:
`iw dev wlan0 interface add mon0 type monit…
-
### Describe the bug
This is a follow-up to https://github.com/openwrt/openwrt/issues/13053 where I incorrectly identified the source of the issue.
The reason seems to be [Govee TV Backlight T2](h…
-
反馈bug/问题模板,提建议请删除
## 1.关于你要提交的问题
Q:是否搜索了issue (使用 "x" 选择)
* [x] 没有类似的issue
## 2. 详细叙述
### (1) 具体问题
A:使用ikuai做主路由拨号,ip:192.168.11.2 lede使用i350 sriov vf网卡做旁路由lan网卡 ip: 192.168.11.2
led…
-
Originally reported by @mccouto in DIGImend/digimend.github.io#7:
I have a Genius Mouse Pen M508 tablet. I use Lubuntu 16.04.3 Kenel 4.10.0-37-generic
The table appears to be normally recognized b…
-
Starting Qt applications (that use OpenGL acceleration) with a larger QT_SCALE_FACTOR environment variable value set results in X becoming unusable.
If for testing purposes I install rpi-imager (`s…
-
**Describe the issue**
There are several globals such as `TextEncoder`, `TextDecoder` and `URL` which seem to have been intentionally left out of `AudioWorkletGlobalScope`. However, these are speci…
-
I've created a vmdk disk image of the **supersilverhaze** release using
```
qemu-img convert -O vmdk distri-disk.img distri-disk.vmdk
```
and used it to create a new "Other Linux 5.x or later kern…
-
Hello Johan
I've tried your newest images on my Banana PI M5 board.
The EMMC is unformatted, I only use an 16 GB SD-Card.
As you can see at the end of the log, there is an error with
initializing…
-
After many hours in monitoring mode, the CPU in a Raspberry PI 3 goes to 100% of the load. The CPU load is produced by the tshark process. Do you have any ideas to solve?