-
Very nice project. I am designing a custom BMS based (bq76930 10s) on your work. Thank you very much for such work.
I have a couple of questions:
- Is MCU STM32F072C**B** or STM32F072C**8** seri…
-
Thanks for making this available. As compared with the Local App, the displayed total lifetime kWh is too large by a factor of 10. I have a Classic 200. I'm running CCDM on Windows under Anaconda pro…
-
## Hardware
* [ ] ESP8266
* [x] ESP32
* [ ] Raspberry Pi
### nRF24L01+ Module
* [ ] nRF24L01+ you verified this is a **Plus model** capable of the required 256kBit/s mode
* [ ] **squar…
-
i plan to use the battery as a house battery without solar, but charge when electricity is cheap and then use the battery when its expensive
what chargers can be used? i tried to look for a 3phase …
-
### Wiki Search Terms
motors not moving
faq motors not moving
wiring correctly motors not moving
### Controller Board
https://amzn.to/3uS7FIF -- i realize you guys do not like these types of boar…
kuito updated
10 months ago
-
On a BBSHD, I would like to set the current limit to 30. However the config tool has a limit of 28, before throwing a "current limit out of range" error.
-
### Bug description
Using Fusion-IO ioScale2 1.65GB card. Compiled the drivers for the pve-kernel-5.3.13-1-pve: 5.3.13-1 (Proxmox 6). The drivers compiled normally and the card is visible. It has a G…
-
Hello, I had an error yesterday and it only happens when I set the values to 100% on the Stage 9, it does not support it for 2 seconds and then the line comes back, everything is fine, what can it do?…
-
Hello, I'm the owner of an off-grid cabin with a newish setup of these items. For better or worse, I spent quite a bit going "all in" on Renogy, only discover nothing provides any sort of remotely usa…
-
### Issue URL (Annoyance)
[https://www.autodesignplus.cz/desulfatory/desulfator-ozivovac-baterii-12v-48v--200ah/](https://adguardteam.github.io/AnonymousRedirect/redirect.html?url=https%3A%2F%2Fww…