-
Hello friends.
I am having serious radio frequency interferences on wmr300 anemometer.
I have tried all kind of hardware solutions without good results.
Interferences are from my own ham rad…
-
`PHP Fatal error: Uncaught exception 'Exception' with message 'DateTime::__construct(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting o…
-
I used the exact code for the wind speed and direction as well as rain sensor, but when I run the program, all of their values are recorded as 0. The only difference is that I'm not posting it to a we…
-
-
- [x] test batteries and charging system
Install sensors
- [x] wind, temp/rh, and rain (and wire to met junction)
- [x] PSP/PIR
- [x] GPS
- [x] Iridium Antenna
- [x] Camera (w/ 32 Gb SD card)…
-
- [x] test batteries and charging system
Install sensors
- [x] wind, temp/rh, and rain (and wire to met junction)
- [x] PSP/PIR
- [x] GPS
- [x] Iridium Antenna
- [x] Camera (w/ 32 Gb SD card)…
-
keeping track of s/n and which buoy and any hardware
- [x] remove canisters
- [x] secure anemometers/remove props
- [x] remove delrin rods
- [x] remove radiometers (psp/pir)
- [x] remove ca…
-
For-gapfilling and Ameriflux files contain sonic anemometer air temperature, not air temperature from the HMP.
See `UNM_RemoveBadData` lines ~1722 and ` UNM_Ameriflux_prepare_output_data` lines ~10…
-
Need the scriptable kind where we can add a query on the command line and redirect the output to a file
-
I wish to take this project to its intended goal of being a portable device to measure wind speed almost as comparable to standard devices, any help regarding current status on this project if you had…