-
I use clear linux from an USB stick. It was working fine till release 34350. After updating to 34360, it is not booting any more. I repair it from another bootable usb. But it is not booting anymore. …
-
Dear xCAT experts and fans,
has anybody ever managed to boot UEFI nodes (via xnba/PXE/...) from a **plain iso image**...? Sometimes, you need to boot compute nodes with eg. a _bootable_ firmware up…
-
Hello,
I tryed to install Jumpdrive belong another linux distribution on my pinephone. To achieve this I build my own u-boot with crust PSC enable. You can find the u-boot with crust enable here [1…
-
While attempting to create a bootable installer of 10.15.7 with 1.4.4 of the patcher I get a failure during the patching image step. The popup window complains about the device requiring at least 10G…
-
When I use the instructions provided:
make patched.w530.img
Downloads g5uj36us.iso from lenovo and then converts to img and applies patch, giving
patched.w530.img
I cannot boot this fi…
ghost updated
2 years ago
-
**Describe the bug**
I using 256GB SD card with fat32 format. Try boot v5.5.4 from this, but didn't it.
So, try boot from 4GB SD card, was possible.
- bootable
- v5.5.4 from 4GB
- v5.5.3…
-
Hi There,
Just a quick question regarding Step 10 - I have deployed my Reference Machine in a VM on Hyper-V using the ISO created in Step 7
Step 10 describes creating a bootable USB to capture t…
-
I've created bootable usb and tried to run it but 15 seconds after it asks for my password my mac starts normally.
I tried to copy the .diagnostics however my mac still trying to start it over inter…
-
https://en.wikipedia.org/wiki/Tails_(operating_system)
-
I have a dell Chromebook 11 3180 with a kefka motherboard, and I've recently installed the full rom uefi, and made made a bootable SD but it only detected once when I had put ventoy on it and then put…