-
Hi,
I wanted to use u8g2 with an existing sketch I found on GitHub (originally made for ESP32, but I ported it to the RP2040).
I already designed a board using GPIO14 and 15 which uses the seconda…
-
A pressure probe on SDP31 does not show positive airspeed, it shows exactly zero - using the known working (from M328) probe setup. But negative (compared to the M328 setup) airflow is shown correctly…
-
Hello Mstrens,
Ver.2.3.10
VScode config.h
#define PITCH_CONTROL_CHANNEL 16
#define PITCH_RATIO_CHANNEL 6
#define PITCH_RATIO 100
#define PITCH_MAX 100
#define PITCH_MIN -100
#define RO…
-
### CircuitPython version
```python
Adafruit CircuitPython 8.1.0-beta.1-50-ge928554a9 on 2023-04-25; Metro MIMXRT1011 with IMXRT1011DAE5A
Board ID:metro_m7_1011
```
### Code/REPL
```python
import…
-
- My goal is: To receive a UDP packet broadcast on the network, and respond if the UDP packet matches a filter.
- My actions were:
Modified the captive-dns-server example to test locally. Worked…
-
The Waveshare RP2040 Zero (found here: https://www.waveshare.com/rp2040-zero.htm) is a small Pico clone that offers enough GPIO pins for a basic setup.
I will likely take this request on and crea…
-
Hi, i soldered and troubleshooted everyting by following the readme, howewer, when i connect the rp2040-0 the the pc after i flasched it, the sd won't appear and it flash red. Tryied also with a rasp…
-
Hi,
Do you the lbr Library Files for the KB2040 and KB2040 MacroPad? Trying to modify the PCB for the more common and cheap RP2040-Zero? I can only find their board and schematic on the Adafruit G…
-
### Description
Hello,
I use it with a Raspberry PICO with modbus rtu protocol and RTS control PIN activated to manage a MAX485 device.
So, I had to modify few lines in the serial.py file because a…
-
Right now, the tool pico-hsm-patch-vidpid.sh cannot be used to patch vid/pid and produces unmodified output:
```bash
d=`mktemp -d`
cd $d
wget https://github.com/polhenarejos/pico-hsm/releases/do…