-
I would like to know risk level of the below services.
CMED, CSURG , MED, NMED, NSURG, ORTHO, OMED, PSYCH, SURG, TRAUM, TSURG, VSURG
e.g. CMED has a higher risk level than MED or SURG?
I als…
-
### Troubleshooting checklist
### Description of the issue
Using the debug-prog + rolling graph can see strange pulses occuring exactly every 2 seconds!
(Very high peak followed by some negative…
-
I'd like to be able to add % for the humidity rate for example, that seems to be quite an important unit to me
-
### Basic Infos
#### Hardware
Hardware: Wemos D1 mini (ESP8266)
Core Version: 2.1.0
### Description
Problem description
### Settings in IDE
Module: Wemos D1 mini
…
-
Milestones:
- [x] M0. Draft Fv1 specs with “prototype” data (raw LOINC units, MDCTN coding) & deploy to UCSD, Broad, Jax for comment [Done: @krobasky @xu-hao and Ashok polled the community, not rea…
KCB13 updated
6 years ago
-
### Troubleshooting checklist
- [OK] I read the README (on master) thoroughly
- [OK] I ran the MAX30100_Tester and I'm going to paste the output down below
- [OK] I filled in all the details of m…
-
Hi,
I'm using the MAX30100_Minimal code and the data I'm receiving is all wrong. As soon as I connect the circuit, even without touching the sensor, it starts to print SpO2 and heart rate values a…
-
As mentioned here https://github.com/RADAR-CNS/Restructure-HDFS-topic/issues/3.
For seemingly random topics I have encountered hdfs files that have 0B length, mostly in the beginning of a partition o…
-
can anyone help me please?
I am trying to get the spo2 using max30100 and arduino nano. I have wired all the pins as an instructions. And the red LED started lighting. But we I am trying to run the c…
-
Hi,
When I change the setting file to enable WGAN and WGAN_clip and run the model, it gives the Error:
NameError: name 'clip_disc_weights' is not defined
Should I give clip_disc_weights a value t…