-
```
To Archive maximum torque, the angle between the stator and rotor magnetic
fields must be in 90deg±30deg
- Normal align (0 deg)
- 2 short commutations (probably CommStart/8)
- Normal startup wit…
-
```
To Archive maximum torque, the angle between the stator and rotor magnetic
fields must be in 90deg±30deg
- Normal align (0 deg)
- 2 short commutations (probably CommStart/8)
- Normal startup wit…
-
Here is the concept of oneshot PWM by Felix:
"normaly MWC workes with 488Hz periodic PWM witch mans one PWM cycle takes ~ 2.2ms and the value that need's to be send can just be updated after each cy…
-
```
To Archive maximum torque, the angle between the stator and rotor magnetic
fields must be in 90deg±30deg
- Normal align (0 deg)
- 2 short commutations (probably CommStart/8)
- Normal startup wit…
-
Hello,
I am using Arduino to supply a pulse width to a 30A Afro ESC to control a 650 kv BLDC motor that is connected to a steel flywheel. The major goal of this project is to generate torque. I am us…
-
```
To Archive maximum torque, the angle between the stator and rotor magnetic
fields must be in 90deg±30deg
- Normal align (0 deg)
- 2 short commutations (probably CommStart/8)
- Normal startup wit…
-
- BLDC Motor
- BLDC Regler
ninux updated
9 years ago
-
```
To Archive maximum torque, the angle between the stator and rotor magnetic
fields must be in 90deg±30deg
- Normal align (0 deg)
- 2 short commutations (probably CommStart/8)
- Normal startup wit…
-
```
To Archive maximum torque, the angle between the stator and rotor magnetic
fields must be in 90deg±30deg
- Normal align (0 deg)
- 2 short commutations (probably CommStart/8)
- Normal startup wit…
-
- [x] Fixierung für Ballnachschieber
- [x] Neue Halter Gegendruckplatte
- [x] Reibung verringern zwischen den Drehtellern
- [x] Komponentenliste updaten (Advys)
- [ ] Schraubensicherungen
- [ ] Seite…
adyvs updated
9 years ago