-
Trying to debug a RP2040 MCU with the dap42 debugger, via CMSIS-DAP interface, the SWD scan fails:
```
(gdb) tar ext :2000
Remote debugging using :2000
(gdb) mon s
Exception: SWDP invalid…
-
I have a Waveshare RP2040 Zero - for the most part it works as expected, but for the life of me I can not get it to serial debug using the Arduino IDE! I've spent ages searching/googling but just can'…
-
Ran into this on the stm32g0/c0 I2C block (`i2c_v2` in your language). The `ISR.DIR` flag in the peripheral is a single-bit field. I had code like this (using the svd2rust APIs):
```rust
match i2c…
-
**Describe the bug**
Project fails to build using `Sysbuild` with an out of tree board.
This issue was first posted #53780 and fixed with #56801. The issue appeared again at aff9683387ff3fc6a88cb1…
-
RP2040-Zero does it have built-in memory?
Can it be used without a SD card?
Because after I write PicoMemcard+RP2040-Zero.uf2 it doesn't open as mass storage.
-
Hello,
I'm trying to use USB serial to read and write some config options from a Raspberry Pi Pico used for a macro keypad. The Pico acts both as a HID device (using the usbd_hid crate) and a Seria…
-
If nobody has started that yet, I'd like to give it a go.
There's some other QOL improvements i'd like to add:
* Through-hole/smd hybrid footprints. (I struggle with the SOD123 package, through h…
-
Hi guys, I feel like I am incapable of a basic achievement: getting any output on the ST7789 on my T-Display RP2040.
I have tried multiple examples, SPI configurations and Pin numbers, but the only…
-
Review the power input/output pins, to ensure that they have the correct Pin Type assigned.
In particular, some 3.3V-based modules actually do have some 5V-powered components. On these boards, it i…
-
Hello,
As my first program (script) in Thonny has grown, I am experiencing an error pop-up, with increasing and predictable occurrence:
```
Traceback (most recent call last):
File "C:\Program…