-
Hi,
I often run out of memory when mallocating stuff, all the times i fixed the correct SRAM size (btw online compiler doesn't allow to edit the .s, needs to delete and import a fixed one), maybe it's…
-
### Description
- Type: Bug
- Priority: Major
According to the [CAN.h](https://github.com/ARMmbed/mbed-os/blob/master/drivers/CAN.h#L141-L142) header file the `read()` method is only supposed to …
-
By default on the KISS FC firmware assigns SmartPort telemetry to the AUX1 pad.
Running Betaflight 3.0 on a KISS FC requires to solder the SmartPort wire over to the TX pin from UART1 or UART3. For ea…
-
See what we've inherited and move important ones over.
- [x] [2096](https://github.com/TauLabs/TauLabs/pull/2096) rfm22b: Allow selection of hardware band.
- [x] [2095](https://github.com/TauLabs/Ta…
-
I can't build JerryScript on Mac OS X Mavericks (10.9.5), I get the following error :
```
❯ make
Setting up prerequisites... (log file: ./build/prerequisites/prerequisites.log)
Prerequisites setup fa…
-
I have no idea if this is in right place, most god awful site on earth to navigate, will never see a reply I'm sure.
did everything by the book, calibrated acc, esc, etc.
set all radio functions,…
-
Hi,
I got some problem when compiling my code by using NUCLEO_F302R8. The error shown below.
Building project SX1276PingPong (NUCLEO_F302R8, GCC_ARM)
```
Scan: .
Scan: mbed
Scan: env
Compile:…
fwndz updated
7 years ago
-
Hi,
I'm adding this issue as a todo item to support arm-linux and with maybe add other architecture-platform easier. And as there is no issue, I want to start with this not-urgent one.
- platforms tha…
-
Smartport telemetry is not working using UART1 or UART3. Telemetry works fine with same X4R and a SPF3 Evo using same BF 3.1 build. I have tried arming and disarming. The only telemetry i get are the …
-
Throttle was showing 885 in configurator, so the quad would never arm.