-
I'm having problems with batman-adv after upgrading (soft reset) openwrt to the latest snapshot. Since all my configuration files are the same as before (batctl 2019.3) I suspect a regression bug with…
-
Hey @aymanbagabas,
I've tried getting it to work on the Matebook E, but I couldn't get it to work. Since I don't have any Experience in developing in C nor in developing device drivers, it would be…
-
I'm running 0.4.0 on Mac OSX 10.6.8. I'm using amazon-ebs. The machine is created with a public IP and my security group, and then fails with "Timeout waiting for SSH." I tried disabling the firew…
-
Good day.
I add a new board STM32F401CCU6 I have something that does not work.
### boards.txt
```
# Black F401CUU
GenF4.menu.pnum.BLACK_F401CC=F401CUU STM32F401CUU
GenF4.menu.pnum.BLACK_F401CC…
-
**Please note we will close your issue without comment if you delete, do not read or do not fill out the issue checklist below and provide ALL the requested information. If you repeatedly fail to use …
-
Hi,
I just received a xavier dev kit and trying to port our tx2 image for xavier.
After adding few jetson-xavier machine specific configurations, the image builds and I can flash. Quite smooth.…
lfdmn updated
4 years ago
-
*IronicSven:*
Supply the following if possible:
- Device problem occurs on
TP-Link CPE210 v2.0
- Software versions of OpenWrt/LEDE release, packages, etc.
Master at 629e6538a1860b22ee0477ed1b…
-
Following is verilog which is flagged for syntax error
```verilog
module DW_apb_i2c (
paddr,
pwdata,
prdata
);
…
ghost updated
5 years ago
-
ghost updated
4 years ago
-
When i run
```
make -j4 ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check
```
on next-20190725 the first time it passes (after fixing up https://www.spinics.net/lists/devicetree/msg…