-
```
What steps will reproduce the problem?
connecting the CANdiy shield and the can cable.
then use the serial monitor.
What is the expected output? What do you see instead?
the error i get is:
FF
!!…
-
Hi Rick,
Need your help in converting the code to use Arduino CNC Shield V3.
Pin assignment's for two Steppers and one servo are below -- **Appreciate your Help**
I want to switch to your firmware…
-
```
- Car is Alfa Romeo Giulietta 2010 1.4 MA
- OS: win 7 SP1 x32
- can shield is with MCP2516 and is working with Arduino Uno r3.
- Arduino and Can shield is working on car
-Sniffer car ECU --------…
-
## Introduction
The executability of a test can depend on certain features that have to be available on a target. It is a common practice to expand board functionality by physically attaching a shi…
-
Setup: Arduino UNO + USB Host shield -> Arduino Leonardo (USB port)
The Arduino Leonardo is running the Caterina bootloader (with modified VID/PID), which shows as a generic CDC ACM serial port on …
-
Support for the Ardbox and M-duino boards from Industrial Shields would be appreciated.
[Industrial Shields web page](https://www.industrialshields.com/)
-
In line: https://github.com/HeimannSensor/Nucleo-64-STM32F446RE-Application-Shield/blob/019f7191cadc409206b37c8352c7300ef1f057d8/16x16/htpad16x16_nucleo_serial_06012020/htpad16x16_nucleo_serial_060120…
-
Hi.
I own a Yamaha Portable Grand piano that lacks real midi connection and thus been thinking about using an Arduino and an USB Host Shield to convert USB-Midi Midi.
In the device compatibility list…
-
```
What steps will reproduce the problem?
connecting the CANdiy shield and the can cable.
then use the serial monitor.
What is the expected output? What do you see instead?
the error i get is:
FF
!!…
-
```
What steps will reproduce the problem?
1. According the wiki, after I import the lib and upload the example, nothing
happend.
What is the expected output? What do you see instead?
I think the mi…