-
As the targetbase is getting larger and larger there is a need for a small readme file in each target directory what describes who is the board owner....what kind of board it is and where to find.
At …
-
When STM32F3 has read protection enabled, it fails to register in DFU mode.
![img_13072016_170416](https://cloud.githubusercontent.com/assets/2101514/16811279/d1b16a8c-4927-11e6-8173-08840e11cd3f.pn…
-
adc_power_on(ADC1) hangs on while (!adc_is_power_on(adc));
I use gcc-arm-none-eabi-4_9-2015q3 toolchain from https://launchpad.net/gcc-arm-embedded/4.9/4.9-2015-q3-update/+download/gcc-arm-none-eabi-…
-
I get the following problem compiling refs/tags/v1.14.0:
```
/usr/bin/../lib/gcc/arm-none-eabi/5.4.1/../../../../arm-none-eabi/bin/ld: obj/main/cleanflight_CJMCU.elf section `.data' will not fit i…
-
Just got the above flight controller and connected it to Clean Flight Configurator. It came with 1.10.0 firmware and only showed Gyro, Accel & Baro as green... the mag is not detected.
From CLI I ran…
-
$ make prerequisites
```
Prerequisites setup failed. See /home/fmj/osokay/jerryscript/build/prerequisites/prerequisites.log for details.
Makefile:396: recipe for target 'prerequisites' failed
make: *…
nisen updated
7 years ago
-
Looks to be the code already contain parts to enable DFU flashing? Not sure what the actual state is and if this part of the code is already working. Actually the GUI is only allowing Hex files to be …
MJ666 updated
8 years ago
-
I have a problem with the Naze32 10DOF, and GPS. I have 2 Neo-6M modules, that connect well to the u-centre, and get many sats, low HDOP, and a fast fix even indoors, but, when connecting to the naze,…
-
I'm using Arduino 1.6.5 as a command line compiler for a Nucleo project. I noticed that quite a lot of warnings are thrown to stdout (or stderr) when running Arduino from a command line window:
Pick…
-
I cloned the repo and then ran `make` in root directory. I am getting this error consistently. Please help.
```
target/adiv5.c: In function 'adiv5_dp_init':
target/adiv5.c:391:11: error: variable…