-
Hi thomasfa18,
I'm wanting to write my own application in C#. I note that you mentioned that you had the official modbus map and was wanting to know if I could get a copy? In particular, I'm afte…
-
Hi everyone,
thank you very much for this great tool.
As you know I am using it for SH-Inverters and it works great.
But know I need to work with an SG-Inverter (SG10RT). The WiNetS WebInterfaces…
-
Hello! I use the solariot with Sungrow SH6-0RT inverter and mqtt. Inverter and raspberry are in the same LAN, mqtt server ist remote.
Works fine for some time, I can get messages from mqtt. Then th…
-
model = "sungrow-sg5kd"
timeout = 60
scan_interval = 60
I've tried multiple time outs (60 is the most I've tried)
It is strange because if I restart the script it works every time
-
Hi!
I'm new to home assistant but this appears to only support one inverter, is that right ? Thanks to others I found the correct MQQT config and details for home assistant configuration.yaml and …
-
Hi,
I can't see entities for the items "return to grid" and "grid consumption" though it should be possible to configure, I think.
I have a sungrow sg10rt, also tried to choose model sg5kd, which …
-
I replaced all the secrets in the yaml file in order to make the setup easier. After all they are no secrets just an IP and a port number. I suggest you also do that and simplify the documentation acc…
-
Hi,
I am having these errors on MQTT Mosquitto broker and not getting any sensor data. Not sure if I have messed up something in the configs? Any help is appreciated. This is my first MQTT intergra…
-
Hi,
I am just setting up my stuff and I would like to support this work with some documentation work, coding what ever. But currently I am struggling a bit.
At first I am just happy with gathering…
-
Thanks for the rewrite @bohdan-s! I just got around to trying it today. My config is as follows:
```
inverter:
host: sungrow.gateway
port: 8082 # Default for modbus is 502, for h…