-
Please answer i have gx6605s set top box can i boot .img using this satelite box or not?
do i need to flash this https://github.com/c-sky/tools/blob/master/gx6605s/loader-sflash.bin
please please an…
-
Can FT232RL be used instead of FT232H?
I see that FT232RL has bit bang mode too.
mine is both 3.3v and 5v.
Zibri updated
5 years ago
-
I am trying to run the MR24HPB1_Example.ino example.
This is the output :
16:15:52.549 -> ESP-ROM:esp32s3-20210327
16:15:52.549 -> Build:Mar 27 2021
16:15:52.549 -> rst:0x15 (USB_UART_CHIP_RES…
-
Not sure what to report but here is what I did and observed.
I deployed `8.2.0-75-gc75640eb0` on a Feather RP2040 USB Host.
Then I added in /lib the library from:
* https://github.com/adafruit/Ad…
-
```
What steps will reproduce the problem?
1. Plug in an FTDI device with multiple interfaces (e.g. FT2232H w/IFACE_A,
IFACE_B)
2. Connect to the first one (successfully), using e.g. SPI:
mpsseA = Op…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Currently, the Node software can successfully send sensor data from all sensors but the BMP280.
When trying to read sensor data, not useful Serial feedback is sent to a connected computer and not joi…
-
Using the ca8210 driver 1.1.2 release in https://github.com/CreatorDev/openwrt/commits/dev-pistachio-4.4.7 i.e. linux kernel 4.4
After booting up the Ci40, tried ping6 test between two Ci40s.
But obs…