-
Would be great to have support for Jakiper server rack batteries.
They have both the RS232 and RS485 ports.
https://jakiperbattery.com/2021/09/22/jk48v100-rs232-pc-monitoring-software/
The BM…
-
Here is the debug info as requested:
root@sol:~/test # java -jar bms-to-inverter-main-0.0.1-SNAPSHOT.jar
[debug.txt](https://github.com/ai-republic/bms-to-inverter/files/13417971/debug.txt)
…
-
Hey all,
I didn't see a group/discord/email so this is kind of a question vs an actual "Issue".
I am working on a golf cart that is using the 250A Daly BMS. Without getting into too much detail,…
-
G'day All -
There's a new kid on the block the DL24M - see https://www.aliexpress.com/item/1005003426244725.html.
On mine, the firmware version in the menu is 2.0.
When I use Syssi's contr…
-
The problem appears on the diyBMSv4 ESP32 controller with an integrated current monitor working under Compiled_Firmware_2023-04-17-08-26 when, for example, saving the Wi-Fi configuration to the SD ca…
-
I'm a bit confused, I ordered the servo that James suggested, and it says 24-36 Volt, but the power supply is 48 volt - so is it ok to power the servo with 48 volt instead of 36, or should I get the 3…
-
### NetBox version
v3.3.4
### Feature type
Data model extension
### Proposed functionality
Add support for coaxial/barrel (DC) power connectors that are widely used by IT equipment. [60…
-
looking to have two (maybe three, definitely not four) GDI4 on the same CAN bus network.
* is there any same stm32 pin between rev A and rev C I can use to distinguish between one unit of rev A (wi…
-
Hello,
I seek some guidance what is the right size (wattage) of the power supply to choose. I neither want to buy a crazy big power supply, neither it should not have too little wattage that I star…
-
Hi,
I have installed the driver for communication on my system earlier this week and am using this with a Uart port on my JBD BMS.
The Bms was recognized and looked to be working ok, however when I …