-
**Is your feature request related to a problem? Please describe.**
MPMD OEM display is a different format pinout than the btt board connector.
**Describe the solution you'd like**
Explain the sta…
-
I'm a little shocked about this, since the part should be a drop-in replacement. The CAD shows the same issue.
Reported via Discord.
-
SKR1.4-Turbo
UPS V2.0
Relay v1.2
TFT E3 v3
I bought such a set. Installed, connected, configured Marlin. Added M81 code to the end of the print. After the end of printing, the printer writes "sh…
-
I hvae a problem with the mini UPS 24V.
The modul detect the power outage succesful and the Z Axis raise 10mm up. But if i power on the printer again the modul detect again a power outage and now th…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I'm experiencing inconsistent movement when printing small circles (in this case, aroun…
-
hi, i have connected the smart filament sensor to the TFT35 E3 V3.0 at the fil-det connector on TFT, this is the part in config.ini
`fil_runout:2
fil_runout_inverting:1
fil_noise_threshold:100
fil…
-
Not exactly an issue per se. I have a sv06 plus and a BTT pad 7 that I have Klipperized using Bassamanitors GitHub [https://github.com/bassamanator/Sovol-SV06-firmware/tree/sv06-plus](url).
It wor…
-
kindly release documments for TMC5160-v1.2. My drives just stopped working.
-
I've been looking for the last few days how to use a MKS TFT35 touch screen display on the MKS Monster8 board without success. I finally figured out how to do it so I decided to create this post.
O…
-
https://github.com/ZaneDubya/YCPU/blob/494796cb6be5a672989fb251460a7b916272bc01/Source/Libraries/YpsilonCPU/Emulation/Processor/YCPU.Instructions.cs#L768