-
Hi,
I was wondering if the Teensy is necessary or if an Arduino Nano could do this as well? Also did you measure the output signal? Is it stable?
Thanks for sharing your project
-
Problem:
Ovdje AK_Tarjan – test za DFS jako povezane čvorove pada zbog prekršenja UNIQUE i NOT NULL ograničenja
Magic number constants:
 (my project). I see you ruled out usi…
-
## 1단계. 문제 이해 및 설계 범위 확정
- ID의 특성? -> 유일, 정렬 가능
- ID는 항상 1만큼 커져야 하는가? -> 시간의 흐름에 따라 커지지만 언제나 1씩 증가하지는 않는다
- ID는 숫자로만 구성? -> YES
- 시스템 규모? -> 초당 10,000 ID 생성 가능해야 한다
### 요구사항
- 유일
- 숫자로만 구성
-…
-
I'm trying to send an inform over SNMPv3 using MD5 and DES. I've tried using alternative privacy and authentication protocols and had no luck. Using no auth and no priv works. My code is very similar …
-
### Describe the issue
Some inferences (taskId ~250, 450, 800 and 1700) cost more than others.
It seems that during this time, the GPU does nothing and is on standby.
I have the same problem wit…
-
### Describe the bug
When the clock is reduced due to high CPU temperature, the system time of the CM4 runs significantly slower than another reference time.
The difference here is approximately 9 …
-
When playing media from a stream source like RTMP, you can more easily get synchronized playback between multiple viewers, however, the infrastructure cost can make these "active" socket streaming tec…
-
I get with the following code unfortunately after a few seconds always a reset at the NodeMCU. But the synchronization works, as you can see on the output. What is the problem?
Code:
```cpp
#incl…
-
# ARTIQ Feature Request
## Problem this request addresses
The documentation for using the EEM boards is at a very high level and is doesn't clearly show what is required to use each board. T…