-
-
### Description
When I simulate the included thyristor bridge model using a current source, the simulation works OK if the simulation Start Time is set to zero. If I pick the Start Time = -1s
![…
-
The mainboard schematic shows D1 (polarity protection) to be a 1N5401 or similar.
That part is too large for the board.
A suitable alternative would be a 1N5197, 1N5818 or 1N5819 Schottky barri…
-
Hi, when running parameter_variation.py (latest develop branch) with Rectifier.fmu in a Linux environment (Python notebook):
```
-------------------------------------------------------------------…
-
Is it possible for new designs to move away from using rpi hat and put that functionality (display and remote)
on motor controller MCU?
RPI Hat makes design very locked in into Raspberry Pi vendor…
-
Salut! Merci pour le partage. ;)
Sur la page:
https://github.com/Ardemius/big-data-resources/blob/master/big-data-main-roles.adoc#developers...
Il est écrit:
> Les langages de programmatio…
-
I have been able to get the OpenSprinkler firmware (with some modifications) to work on an ESP-01 controlled relay board like the ones shown at these links:
[AliExpress Link](https://www.aliexpress.c…
-
Wonderful work!
When I go through the config `waymo_centerpoint_pillarnet_3x.py`, I found the rectifier the test_cfg are set to zero, which indicates the predicted IoUs are not used.
Any special c…
-
**Background:**
I am sending CAN messages from a power module to a controller.
**Problem:**
I want to send an encoded message and then decode it to be used in another function. However, it seems…
-
Use the template below if you have an issue or want to report a bug. If you have a question or a feature request you can ignore the questions below. This is a template so feel free to remove any of th…