-
Dear PulseSensor Team,
> I download the zip the current version.
I am using **Arduino Nano 33 BLE** and **PulseSensor_BPM_Alternative** code. It is working for the serial plotter, but I get very…
-
Hi,
It seems that when the sketch prints only numbers
-
Currently the program only displays data at 60Hz
-
After board reset or upload, a bunch of errors show when a monitor window is open or opened.
- Closing the monitor window and reopening seems to cure it.
- Seems to occur only the first time after …
h2ad2 updated
4 years ago
-
I don't have a formalized test plan but tried a number of things on my solderless breadboard set up.
exercised input pins:
- x, y, z limits work correctly.
- door works
- reset/panic works
- p…
-
When opening the serial plotter we noticed that LIDAR distance signal (blue line) at random time (usually when you move the torch) jumps to very high levels (>>12000) for few data points. See attached…
-
When using the following sketch:
```arduino
void setup() {
Serial.begin(9600);
while (!Serial);
Serial.println("aX,aY,aZ");
Serial.println(); //
-
Hello.
I've detected two problems.
**First**
If I execute...:
```
void setup() { Serial.begin(9600); }
void loop() { Serial.println(2); }
```
...value 2 is shown at the top of Serial Plotter bu…
-
Hello @devinaconley
I modified your "listener" source code attached below to be able, by pressing the space key, to toggle time-stamped recording of all variables on hard disk, in a date&time-stampe…
-
**Describe the bug**
Plotter segfault in phase 1
```
[121795.335173] chia[78466]: segfault at 40 ip 00007f2f7fb16a6c sp 00007f2f7b248670 error 6 in chiapos.cpython-38-x86_64-linux-gnu.so[7f2f7fadf0…