-
I have the project up and running on my G0752Z lathe. When I attempt to thread 13 TPI it comes out about 16TPI, and when I thread at 24 TPI it comes out around 32 TPI. I know the lead screw is set one…
-
Hello..
I have a strange issue..
When i connect the skr 1.3 via USB the PC detects and the microSD appears and everything works ok...
When i connect 24v i loose comunication with the pc...
But..
…
-
Do you want me to work on the turntable...if so what hardware do you have?
-
As soon as I boot the BTT SKR3 EZ board I get a TMC Connection Error reading ALL HIGH on all axis regardless of the number of drivers installed.
I cannot move any of the steppers while this error is …
-
- [ ] #88
- [x] #74 Printhead page typos
- [ ] #26
- [ ] #46 Could be used for Hot end / goliath
- [x] #90
- [x] #91
- [ ] #39 Belt routing / motor designation
---
https://www.youtube.com/wa…
-
Hi, all!
I have problem with configuring Repetier firmware for such configurations.
I've set pins properly, and created Configuration.h, but it ignores motion on X,
puts motion on Y to X axis motor dr…
-
I have recently upgraded to a SKR 1.3 with 5 BIGTREETECH TMC2209 drivers. The firmware is all configured, but the LCD shows 'TMC Connection error'. M122 also shows this.
![IMG_0218](https://user-ima…
-
- [ ] Design and Publish Schematics and EasyEDA link
- [ ] Add DIN Rail Mount for the PCB
- [ ] Add Gerber files
- [ ] Add Files for PCB Assembly
-
-
## Project description
I need a data acquisition library that has the following traits:
* it is a native library
* object oriented
* **has concept of a device class**. Examples of a device cla…