-
ok, I might be missing something here, but `escTelemetryPort` is never used other than to hold a serial port reference, it's never used to read or write from.
That being the case I don't think the …
hydra updated
7 years ago
-
hydra updated
8 years ago
-
The following code will hang forever in `adc_calibrate_wait_finish`:
```
rcc_periph_clock_enable(RCC_ADC);
adc_power_off(ADC);
adc_calibrate_start(ADC);
adc_calibrate_wait_finish(ADC);
```
whereas t…
-
According to the reference manual (DocID018940 Rev 7, page 233) following procedure should be used to disable an ADC.
_Set ADDIS=1 to disable the ADC and put the ADC in power down mode. The ADEN
and …
-
My STM32F3 Discovery board isn't working with betaflight and I think I've narrowed it down to the gyro->intStatus not being set for the acc/gyro L3GD20. I used gdb to step all the way to the "gyro->in…
-
Just a friendly hint:
Please compare your used core (libmaple) with the one from stm32duino:
https://github.com/rogerclarkmelbourne/Arduino_STM32
It's also based on the leaflabs core and the whole com…
-
run `make precommit` in ubuntu 32bit host machine.
got error while building for stm32f3 with LTO enabled
```
make[5]: Entering directory
`/.../harmony/jerryscript/build/obj-VALGRIND-OFF-VALGRIND_FRE…
-
It is possibility a typo in lib/stm32/f3/rcc.c
void rcc_set_ppre2(uint32_t ppre2)
{
uint32_t reg32;
```
reg32 = RCC_CFGR;
reg32 &= ~((1
-
What kind of issue is this?
- [ ] Question. This issue tracker is not the place for questions. If you want to ask how to do
something, or to understand why something isn't working the way you expe…
-
NAND-flash space used for reading/writing from Embox is hardcoded (i.e. src/drivers/flash/flash.lds.S src/drivers/flash/stm32f3_flash.lds.S).
It would be the way better if such values were passed as m…