-
Hello, i have connected 128 LiFepo4 Cells (18S 8P) via 8 pcs "All In One Module V490" to an "Controller Board V4.6" and that all is connected via Can Bus to an 48V Victron System.
Now i want to ext…
-
Better output drivers (currently the DAC output of the HiFi Berry board are used)
* survive 48V phantom power on output
* Differential outputs (e.g. https://thatcorp.com/datashts/THAT_1606-1646_Da…
-
Apologies if this is not the correct way to ask a question of the project team. What modifications would be required to allow this to be used with a higher voltage power supply & a larger stepper moto…
-
Not Really an issue...
If you have some of the schematics you will see my name all over them! For my Sins I was the Main HW designer for the WhiteCross Blade servers from 1988-2003 and went from th…
-
I need an solution to import the Data from Pylontech US3000C (48V LiFEO4 Batteries), via RS485, RS232 does not work on "C"
Models
The data possible in http://www.multisibcontrol.net/
Also ava…
-
### Is your feature request related to a problem? Please describe.
as discussed here
https://github.com/helgeerbe/OpenDTU-OnBattery/pull/1214#issuecomment-2329737784
### Describe the solution you'…
-
Hello,
what should I enter in the battery capacity (Wh) input field in the parameter configurator if I have a 19.2Ah 48V battery?
Exactly the value 19.2 x 48 = 921.6 Wh?
The comma as a point …
-
### Requested feature:
It would be great if we could select multiple devices in the settings to be controlled by the Power On button in the Mainsail UI. My printers have multiple power relays that ne…
-
Hello
In my setup I intend to switch the 48V to the TMC5160 drivers on only when needed, so when i boot everything up VMot is 0V. Under these conditions autotune will cause an error and will make …
-
**Device Description**
BSLBATT 10kWh Lithium-ion 48V 200Ah Solar Battery is a wall-mounted battery.
**Device Access**
Out system integration partner Pestech has an access.
**Communication Prot…