-
I need some help to re flash my A9G module as it do not respond over over UART1 (TX1/TX2), I already did burn weeks ago a micropython firmware on the module. I think yesterday i used the usb 2serial a…
-
Very Helpful for some IoT Projects.
![canvas](https://user-images.githubusercontent.com/6939083/101401366-89bbb580-38d2-11eb-8e6a-3af8e7989190.png)
-
## 1. SDK version(SDK 版本)
{
V2.112
}
---
## 2. In what kind of operation problems appear, and how to reproduce the problem ?(什么样的操作步骤问题会出现,是否是稳定复现,如何复现问题?)
{
During normal operation of the …
-
Hello,
I´ve connected the board to a micro usb power source, connected the usb-ttl serial RX and TX cables to the TX and RX pins (respectively), launched ai thinker, sent AT commands and nothing is…
-
Hi,
I have doubts about how to work safely with the A9G board.
What is the maximum voltage that I can apply to the GPIO and ADC without damaging the board?
Can I damage the board if I apply mor…
-
## 1. SDK version(SDK 版本)
{
N/A
}
Is there any way to access the SD card without resorting to custom firmware, e.g. via AT commands? There is a unsoldered header on the A9G "pudding" dev board…
-
I have implemented this code in a9g, it connects to traccar but does not send the correct information. It always stays at latitude 90º and longitude 0º.
IP: demo4.traccar.org
port: 5005 and 5055…
-
SDK_VERSION: V2.112
I am hoping to develop code to run on the A9G using [Rust](https://rust-lang.org). Maybe port FreeRTOS for use with Rust on the device.
Also, can the A9G module and this SDK …
-
### What
- The `product_quantity_unit ` is mostly not present
### Steps to reproduce the behavior
1. Check JSON result for `La Crème Légère Epaisse 12%MG` (https://fr.openfoodfacts.org/cgi/search…
-
In order to operate a mobile device in my country, I'm required to ask an IT authority to ... authorize. They ask me for FCC-ID.
I've found that as a manufacturer, AI-Thinker has the FCC code 2AHM…