-
Hello Dr.Jiao,
My board is MicroPhase ANTSDR AD9363, I followed the steps below, but had problems executing the . /wgd.sh command, I encountered a problem.
1. Downloaded mirrors in the table.
2…
-
As I really need a backup from a "virgin" Pluto Plus v2 I am writing this article in hopes someone is so kind to provide the files, thank you! (PS: It will also help you in case something goes wrong a…
-
I am currently trying to implement Openwifi on an ADRV9361-Z7035-BOB board and I would like to know where exactly we should copy the BOOT.bin and devicetree.tdb files? One more thing, when we want to …
-
## Issue Description ##
Hi, I know the support for the analog devices is limited due timestamp not implemented with analog devices drivers but from other issue I know there is some test than can be …
-
A Pluto+ Release V2 has 3.3V on JTAG connector instead of 1.8V
If you upload 0.33 on these devices the Bootloader is destroyed and you have a Bricked device
**!!! Be Warned Recovery is not so easy !…
-
Hi,
I generated a filter (Tx) which returned 128 taps with first and last 8 taps all zeros. I wonder if this is expected and if there's any reason it wasn't a 112 tap filter instead?
-
Can not set the frequency, scale or phase attributes for the second TX channel. This behavior exists in all the DDS modes, except 'DAC Buffer'.
Csomi updated
3 years ago
-
Hi,
I followed the last developments of the openwifi project with high interest and I have successfully started the new release Notter 1.4.0 by using the "zed_fmcs2-board" and the "zcu102_fmcs2-bo…
-
Hi!
I am experimenting with OFDM on a bladeRF 2.0 xA5 and a 2.0 xA4.
This is a 20MHz LTE signal at 770 MHz with maximum tx gain.
![20M_SDR_blade_rf_0 77](https://github.com/Nuand/bladeRF/a…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
I'm the author of #99 and my extension board is finally working. Now I'm trying to port Openwifi firmware. You already know my…