-
Hello,
I used your script but:
- national.com now redirects to ti.com, apparently Texas Instruments ate them (it's unclear to me whether the spice files are now provided by TI or not).
- Analog devic…
-
Hello, I am using my design as macro, and I want to insert it into the caravel project. I tried both caravel_user_project and caravel_user_project_analog. Both of them get stuck at certain step in the…
-
Possible solutions:
- Analyse signal and design analog solution
- Digital LPF
- Gate the height measurements (e.g. reject changes greater than 10cm between samples)
-
Add an analog clock project made using HTML, CSS, and JS
**Project feature**
- Responsive design
- Dark mode
- Shows actual time
![Screenshot (1109)](https://user-images.githubuserconte…
-
I've had a couple of users ask if the IO pins can be used for analog input. Unfortunately the hardware designer did not bring any of the STM8 analog inputs out to IO pins ... the objective was just a …
-
Hi!
I stumbled upon the first iteration of your midi looper project and i have to say it's quite amazing, great job!
I saw this new version that seems to be a direct improvement of the original …
-
### TL;DR
I'm relatively new to devops and trying to learn from this example. The doc is great (and very useful) for setting up the environment, but once it's set up I am at a loss re: how to accompl…
-
Looking at your A2 version schematics pdf, on sheet 16 that DRVSS (analog output driver ground) is connected to digital rather than analog ground. This doesn't seem to tally with the TI spec sheet or …
-
First of all: Compliments for all the work done!
Could you elaborate a more on the analog input and analog output circuitry?
Purpose is to 'learn' from a well-proven-circuit to design my own circu…
-
There seems to be limitations with using the "analog switch" in a subcircuit. I had found that all switches "normally open" turn closed and can not be actuated by logic signals at the nodes after bein…